Contactar Proveedor? Proveed
John chang Mr. John chang
¿Qué puedo hacer por ti?
Chatear Ahora Contactar Proveedor

YANGZHOU POSITIONING TECH CO., LTD.

Información de la industria

Home > Información de la industria > Zero-crossing trigger circuit design based on thyristor

Zero-crossing trigger circuit design based on thyristor

2019-05-09

Probe current voltage pin 290*3600 needle head diameter is 3.5mm can be too large

Circuit principle : The zero-crossing sync pulse is a pulse of 50Hz AC voltage zero-crossing moment, which can make the thyristor trigger the conduction when the AC voltage sine wave crosses zero. The zero-crossing sync pulse is generated by the zero-crossing trigger circuit. A more detailed circuit diagram is shown. In the figure, the voltage comparator LM311 is used to convert a 50 Hz sinusoidal alternating voltage into a square wave. The positive and negative edges of the square wave act as the input trigger signals of the two monostable flip-flops respectively. The two narrow pulses of the monostable flip-flop output are mixed by the diode or the gate to obtain the corresponding 220V AC power. Zero sync pulse. This pulse is applied to the temperature control circuit as a trigger sync pulse of the thyristor on the one hand, and to the T0 and T1 terminals of the 8031 as a count pulse on the other hand.

Zero-crossing trigger circuit design based on thyristor

Realizar consulta

John chang

Mr. John chang

Email:

info@yzpst.com

Realizar consulta

Número de Teléfono:86-514-87782298

Fax:86-514-87782297

Móvil:+8613805278321Contact me with Whatsapp

Email:info@yzpst.com

Dirección: 3rd Floor, Weiheng Building No.20 B Area, Yangzhou, Jiangsu

Sitio movil

http://es.yzpst.com

苏ICP备05018286号-1